General configuration

Overview

Devices from the ELA Innovation BLUE range include an NFC memory used to configure the tag.

Using the Device Manager software, this memory allows writing the device operating parameters.

---

Configuration parameters

Parameter	Description	Values	Availability
Name	Tag name transmitted in BLE advertising frames	Max 15 characters (0-9, A-Z, a-z, space, _, -)	Entire Blue range
Enable	Enable or disable the device	True / False	Entire Blue range
TX Power	BLE transmission power	-40, -20, -16, -12, -8, -4, 0, +3, +4 dBm	Entire Blue range
Format	Firmware operating mode	Id, T, RHT, MAG, MOV, ANG, iBeacon, Eddystone, Analog IN, Digi IN, Digi OUT, PIR, PROXIR	Product dependent
Advertising Period	Time between two BLE advertising events	0.1 → 10s or 100 → 86400000ms	Entire Blue range
UUID	iBeacon UUID identifier	32 hexadecimal characters	iBeacon products
Major	iBeacon Major field	4 hexadecimal characters	iBeacon products
Minor	iBeacon Minor field	4 hexadecimal characters	iBeacon products
NID	Eddystone Namespace ID	20 hexadecimal characters	Eddystone products
BID	Eddystone Beacon ID	12 hexadecimal characters	Eddystone products
Measurement Period	Sensor measurement interval	0.1 → 86400s or 100ms → 86400000ms	Sensor devices
Data Logger Period	Data logger recording interval	10s → 86400s or 10000ms → 86400000ms	Sensor devices
Data Logger Enable	Enable or disable the datalogger	True / False	Sensor devices
Acceleration Threshold	Acceleration threshold (MOV format)	32 → 8000 mg	MOV devices
PIR Sensor Sensitivity	PIR sensor detection range	0=50 cm, 1=1 m, 2=2 m, 3=5 m	PIR devices
Manufacturer Data Enable	BLE payload format	True = Manufacturer Data, False = Service Data	Entire Blue range

Remarks

• Available settings may vary depending on the product and firmware version.
• The configuration must be written to the tag via NFC to be applied.